How is an orienteering map made?
What are the steps, data and software used to make an orienteering map, and how long does it take?
Short answer
An orienteering map is made in four main stages. First, a base map is built from elevation models, orthophotos and existing maps. Then the mapper walks the area and checks every feature on the ground (field survey). Next, the map is drawn in OCAD or OpenOrienteering Mapper to the IOF standard (ISOM 2017-2 or ISSprOM 2019-2). Finally, it is quality-checked and test-run. Field survey for a forest map takes roughly 16–60 hours per km².
An orienteering map is drawn so that a runner can navigate at speed. That makes it far more detailed than a general-purpose map: a single boulder, a small pit or how runnable the forest is all appear on it. The International Orienteering Federation (IOF) sets out how these maps are drawn in its specifications: ISOM 2017-2 for forest and ISSprOM 2019-2 for sprint and urban areas.
1. Purpose, area and permissions
Every map starts with a question: who will use it, and for what? A race map, a school-ground map and a permanent-course map need different scales, detail and printing.
- Boundaries: the area, safe boundaries (roads, fences) and out-of-bounds zones.
- Scale and standard: 1:15,000 base scale for forest (1:10,000 enlargement), 1:4,000 for sprint.
- Permissions: from the landowner, municipality, forest authority or school; protected areas and sensitive periods (such as bird breeding seasons) are noted from the start.
2. Base data: the skeleton of the map
Before going into the field, the mapper prepares a base map. The most valuable sources are:
- LiDAR and digital elevation models for contours and landforms. Open LiDAR access is limited in Türkiye, so digital elevation models and photogrammetric height data are often used instead.
- Orthophotos for vegetation boundaries, open areas, roads and buildings.
- Existing base maps and OpenStreetMap for buildings, roads and urban structure.
- Drone orthophotos, produced with permission for small areas (schools, campuses).
The better the base, the less time in the field — good base data saves hours per km².
3. Field survey: the heart of the map
An orienteering map is made in the field, not at the desk. The mapper walks the area systematically and checks every feature on site:
- Landforms: spurs, re-entrants, pits, knolls, earth banks.
- Boulders and rocky ground.
- Water: streams, marshes, springs.
- Vegetation: how runnable the forest is (white, light, medium and dark green).
- Man-made features: paths, fences, walls, buildings.
Today, field survey is mostly done on a tablet with OpenOrienteering Mapper or OCAD and GNSS positioning. The mapper includes everything a runner will notice and use, and generalises (simplifies) detail that would not be noticed.
4. Cartography: a legible map
The field data is turned into a clean map with the IOF symbol set:
- Minimum dimensions: every symbol has a minimum size in the specification; smaller detail cannot be read.
- Colour balance: colours and symbol density are balanced so that the map reads at a glance.
- Map frame: scale, contour interval, north lines, legend, mapper and year.
5. Quality control and test run
For major-event maps, the IOF runs a desk review: symbol sizes, minimum lengths and areas, the use of form lines and the overall drawing are checked. The same approach works for club maps. Then someone other than the mapper test-runs the map, and misleading or missing features are corrected.
6. Delivery and maintenance
A delivery package usually includes:
- A print-ready PDF (and printed maps if requested),
- An editable map file (OCD or OMAP),
- Georeferenced files (KMZ, GeoTIFF),
- Ready-made courses and control descriptions if requested.
Maps age: new buildings, forestry work and new paths change the terrain. Planning a revision every few years extends a map’s life.
Time and cost
According to British Orienteering’s guide to procuring maps, field survey for a forest map takes 16–60 hours per km² depending on terrain and the mapper’s experience; cartography takes 50–100% of the survey time, plus extra time for layout. Small areas such as school grounds can be done in a few days. Cost depends on area size, terrain complexity, base data quality, scale and scope of delivery.
With Kanyon Orienteering
Kanyon Orienteering makes orienteering maps of forests, parks, campuses, school grounds and historic towns to IOF standards in and around Ankara, plans courses and sets up permanent courses. Details and quotes: Mapping services.
Frequently asked questions
Who makes orienteering maps?
Orienteering maps are usually made by experienced mappers from clubs or federations. Most mappers are also orienteers, so they know how a map is read at running speed. Kanyon Orienteering's mappers are also the club's athletes, coaches and controllers.
What software is used to draw orienteering maps?
The most common commercial program is OCAD. The free, open-source OpenOrienteering Mapper includes the ISOM 2017-2 and ISSprOM 2019 symbol sets and also runs on Android tablets in the field. Purple Pen and OCAD are used for course planning.
Can you make an orienteering map without LiDAR?
Yes. LiDAR is a very valuable base for contours and vegetation but not essential. A base can be built from digital elevation models, orthophotos, existing maps and permitted drone imagery, with gaps corrected during field survey. Field time is longer in that case.
How long does it take?
It depends on the size of the area, terrain complexity and base data quality. According to British Orienteering's guide to procuring maps, field survey for a forest map takes 16–60 hours per km² and cartography 50–100% of the survey time. A school-ground map can be finished in a few days.
Who owns the copyright of a map?
According to British Orienteering, copyright may stay with the mapper even when the map has been paid for. That is why printed maps, editable files, update rights and permitted uses should be agreed in writing from the start.
Sources and further reading
Related guides
- ISOM and ISSprOM: orienteering map standardsIOF orienteering map standards - ISOM 2017-2 (forest) and ISSprOM 2019-2 (sprint), scales, contour interval, colours, ISMTBOM and the new ISOM 2030 process.
- School-ground orienteering mapsSchool-ground orienteering maps - scale, content, how they are made, use in PE, maths and geography lessons, safety and teacher training.
- How to read an orienteering mapHow to read an orienteering map: colours, symbols, scale, contours and magnetic north lines, explained step by step for beginners.